We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396906
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 40 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822396906, get in touch with FAMAGA, the world's principle vendor of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of merchandises and particular attention to each orderer. We respect everyone, who engaged with us - hence, our regular clients pick up the most convenient purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Israel, Finland, Liberia, United States, Seychelles, Norway, Papua New Guinea, Sri Lanka, Canada, Haiti, Iraq, South Korea, Grenada, Fiji, Zimbabwe, Moldova, Togo, Suriname, Honduras, Angola, Philippines, Russia, Kyrgyzstan, Brunei, Lithuania, Hungary, Monaco, Bosnia and Herzegovina, Ireland, El Salvador, Malta, Iran, Estonia, Luxembourg, Indonesia, The Gambia, Morocco, Tajikistan, Egypt, Botswana, Montenegro, Serbia, Cape Verde, Belarus, Malaysia, Mauritius, Antigua and Barbuda. A well-shaped logistics network and a partnership network cheer us to conduct our items anywhere in the world promptly without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, phone us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |