We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147993
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480147993, reach FAMAGA, the world's dominant producer of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and personalseparate attention to each buyer. We admire everyone, who worked with us - so, our regular customers accept the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Rwanda, Samoa, Gambia, Ireland, Comoros, Kenya, Slovenia, Italy, Oman, Zimbabwe, Sierra Leone, Poland, Malawi, Tajikistan, Brazil, Djibouti, Sweden, Canada, The Gambia, Croatia, El Salvador, Czech Republic, Yemen, Greece, Israel, The Bahamas, Japan, Guatemala, Angola, North Korea, Australia, Luxembourg, Serbia, Brunei, Georgia, Suriname, South Sudan, Mauritania, Benin, Bulgaria, Peru, Estonia, Burkina Faso, Qatar, Costa Rica, Tunisia. A well-elaborated logistics series and a partnership network allow us to send our products anywhere in the planet with no delay without compromising product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |