Aventics (brand of Emerson) 0822242401
  Aventics (brand of Emerson) 0822242401

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822242401 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822242401

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Piston diameter 50 mm
Piston rod thread M16x1,5
Standardization ISO 15552
Stroke 50 mm
Sealing material Fluorocaoutchouc
Scraper Fluorocaoutchouc
Compressed air connection G 1/4
Compressed air connection type Internal thread
Temperature resistance Heat resistant

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822242401

If you are pursuing Aventics (brand of Emerson) 0822242401, communicate with FAMAGA, the world's foremost distributor of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each orderer. We appreciate everyone, who engaged with us - therefore, our regular purchasers accept the most desirable purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the globe . A well-shaped logistics network and a partnership network let us to ship our units anywhere in the globe with no delay without compromising product quality.

A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.

All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.

To inquire or make a request, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822242401

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -10 ... 150 °C
Medium temperature min./max. -10 ... 150 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Fluorocaoutchouc
Nut for piston rod Steel, galvanized
Scraper Fluorocaoutchouc
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.