We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020806
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412020806, get in touch with FAMAGA, the world's influential distributor of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and personalseparate attention to each purchaser. We praise everyone, who conspired with us - so, our regular purchasers accept the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Italy, East Timor, Lithuania, Tajikistan, Romania, Montenegro, Fiji, Papua New Guinea, Cape Verde, Colombia, Panama, Oman, Iceland, Norway, Bosnia and Herzegovina, Yemen, North Korea, Mauritania, Poland, Guatemala, Nicaragua, Sudan, Guyana, Samoa, Albania, Liberia, Egypt, Kyrgyzstan, Cyprus, Morocco, Suriname, China, Tanzania, Belarus, Armenia, Burundi, Haiti, Bolivia, Sweden, Nepal, Philippines, Seychelles, United States, Hungary. A well-elaborated logistics series and a partnership network help us to ship our units anywhere in the world as soon as possible without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Guide bushing | Steel |