We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
1670516000 (167-DA-050-0160-DM00SCWS0S) AVENTICS - Zugankerzylinder ISO 6431, Serie 167
Part number
1670516000
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1670516000 (167-DA-050-0160-DM00SCWS0S) AVENTICS - Zugankerzylinder ISO 6431, Serie 167 1670516000, connect FAMAGA, the world's primary provider of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of products and particular attention to each purchaser. We understand everyone, who conspired with us - therefore, our regular clients get the most beneficial purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such purchasers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the earth Germany, United Kingdom, Congo, Equatorial Guinea, Pakistan, Spain, Saudi Arabia, Brunei, Ecuador, Belgium, Nigeria, Burma, Tanzania, Grenada, Peru, Bolivia, Lebanon, Thailand, Qatar, Hungary, Czech Republic, Slovakia, Azerbaijan, Costa Rica, Liechtenstein, Mali, Lithuania, The Bahamas, Chile, Seychelles, Eswatini, Uruguay, Central African Republic, Armenia, Switzerland, Israel, Luxembourg, The Gambia, Sierra Leone, Macedonia, Uganda, New Zealand, North Korea, Paraguay, Brazil, South Korea. A well-shaped logistics connection and a partnership network allow us to conduct our goods anywhere in the earth immediately without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or write to the online chat on our site. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |