We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340509
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822340509, reach FAMAGA, the world's principle retailer of streamlined equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of outputs and individual attention to each customer. We esteem everyone, who joined with us - therefore, our regular consumers procure the most helpful purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Myanmar, Saudi Arabia, Congo, Poland, Burma, Mauritius, Denmark, Uzbekistan, Brazil, Laos, Belize, Mauritania, Samoa, Belgium, Turkmenistan, Iraq, Estonia, Bulgaria, Iran, Ghana, Tonga, Kyrgyzstan, Israel, Jordan, Philippines, Montenegro, Nepal, Mongolia, Liechtenstein, South Sudan, Moldova, Finland, Senegal, Guatemala, Switzerland, Andorra, Mali, Tunisia, Angola, India, New Zealand, Austria, Yemen. A well-elaborated logistics bond and a partnership network help us to conduct our units anywhere in the planet as soon as possible without discrediting product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that users choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |