We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637986
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637986, make contact with FAMAGA, the world's major company of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and particular attention to each customer. We praise everyone, who liased with us - so, our regular purchasers receive the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Guyana, Colombia, Austria, Eritrea, Bosnia and Herzegovina, Bolivia, Russia, Burkina Faso, Botswana, Jamaica, Kyrgyzstan, Moldova, Singapore, El Salvador, Canada, Zambia, Nepal, Dominica, Swaziland, Vietnam, Afghanistan, Comoros, Croatia, Denmark, Kuwait, Uganda, Pakistan, Angola, Antigua and Barbuda, Belarus, Argentina, Morocco, Israel, India, Switzerland, Guatemala, Qatar, Malta, Peru, East Timor, Brunei, New Zealand. A advanced logistics chains and a partnership network allow us to conduct our items anywhere in the world with no delay without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |