We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472406622
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7472406622, make contact with FAMAGA, the world's the best retailer of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are portrayed in the quality of products and special attention to each buyer. We praise everyone, who liased with us - thus, our regular purchasers get the most acceptable purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such customers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, South Sudan, Oman, Montenegro, Monaco, Italy, China, The Gambia, Mozambique, Ireland, Malaysia, Paraguay, Slovakia, Netherlands, Georgia, Romania, Mali, Sweden, Mauritius, Morocco, Togo, Indonesia, Latvia, Cyprus, Norway, Suriname, Equatorial Guinea, United States, Jamaica, Malta, Poland, Niger, Dominica, Czech Republic, Iceland, Djibouti, Belarus, United Arab Emirates, Andorra, Samoa, Haiti, Kuwait, Uganda. A well-elaborated logistics chains and a partnership network allow us to deliver our items anywhere in the world as soon as possible without discrediting product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is growing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as stay in control.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |