We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000294
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Stroke | 10 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R402000294, get in touch with FAMAGA, the world's dominant producer of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of spare parts and private attention to each consumer. We appreciate everyone, who conspired with us - therefore, our regular buyers accept the most helpful purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Belize, Grenada, Brunei, Uzbekistan, Congo, Armenia, Tunisia, Libya, Niger, Andorra, Afghanistan, Belarus, Liberia, Cameroon, Saudi Arabia, Benin, Uganda, Algeria, Uruguay, Kiribati, Senegal, Montenegro, Eswatini, Bolivia, Central African Republic, Haiti, Brazil, Malta, Malaysia, Czech Republic, Mauritania, Bangladesh, Comoros, Peru, India, Israel, Norway, Panama, Mali, Sierra Leone, Australia, East Timor. A well-developed logistics chains and a partnership network let us to dispatch our goods anywhere in the world promptly without compromising product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, get in touch with us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |