We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822497100
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822497100, catch up with FAMAGA, the world's top vendor of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and particular attention to each purchaser. We appreciate everyone, who joined with us - thus, our regular clients obtain the most acceptable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such clients, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Nepal, Seychelles, Qatar, Indonesia, Ireland, Slovenia, Dominica, India, Malaysia, Russia, Burundi, Haiti, Serbia, Latvia, Syria, Vietnam, Nicaragua, Belarus, United Arab Emirates, Hungary, United States, Uzbekistan, Jamaica, Turkmenistan, Lithuania, Tajikistan, Guyana, Burkina Faso, Switzerland, Armenia, East Timor, Equatorial Guinea, Albania, Cape Verde, Pakistan, Poland, Cyprus, Philippines, Zambia, Angola, Sierra Leone, Djibouti, Australia, Mexico, Yemen. A well-shaped logistics bond and a partnership network help us to ship our elements anywhere in the world promptly without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or order, get in touch with us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |