We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472021270
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 25 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 350 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472021270, communicate with FAMAGA, the world's major distributor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each customer. We value everyone, who liased with us - thus, our regular consumers receive the most helpful purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such consumers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Iraq, Kuwait, Honduras, Bahamas, Kazakhstan, Bolivia, Mauritania, Eritrea, Djibouti, Cape Verde, Brazil, Comoros, Fiji, Colombia, Laos, Belarus, Armenia, Suriname, Equatorial Guinea, Burkina Faso, Haiti, Ireland, Egypt, Albania, Sweden, Lithuania, Nicaragua, Georgia, Madagascar, Nepal, Serbia, Zambia, East Timor, New Zealand, Panama, Sierra Leone, Qatar, Montenegro, Mexico, Zimbabwe, Mozambique, Rwanda, Dominica, Argentina, Luxembourg, Botswana. A well-elaborated logistics link and a partnership network allow us to dispatch our units anywhere in the earth immediately without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |