We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001430
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001430, call FAMAGA, the world's major producer of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each customer. We cherish everyone, who joined with us - therefore, our regular buyers procure the most desirable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such clients, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Uganda, Ukraine, Papua New Guinea, Portugal, Paraguay, Switzerland, Denmark, Colombia, Iceland, Belarus, Lithuania, Japan, Armenia, Serbia, Malawi, Georgia, Mali, Netherlands, Uzbekistan, Saudi Arabia, Guatemala, Peru, South Korea, Liechtenstein, Hungary, Libya, Tanzania, Estonia, Czech Republic, Austria, Andorra, Philippines, Moldova, Djibouti, Argentina, The Gambia, Belize, Nigeria, Sierra Leone, Iraq, Kiribati, Uruguay, Montenegro, Suriname. A well-shaped logistics connection and a partnership network guide us to send our items anywhere in the globe immediately without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or order, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |