We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020802
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412020802, get in touch with FAMAGA, the world's major company of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each customer. We respect everyone, who engaged with us - so, our regular consumers pick up the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 3500 such clients, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Swaziland, Algeria, Honduras, Serbia, Monaco, Burkina Faso, Georgia, Vietnam, Turkey, Jamaica, Croatia, Bulgaria, Ghana, Cyprus, Singapore, Kenya, Panama, Morocco, Romania, Latvia, Estonia, Nigeria, The Bahamas, Madagascar, Greece, South Sudan, The Gambia, South Korea, Mauritania, Indonesia, Costa Rica, Egypt, Australia, Ireland, Kuwait, Samoa, Cape Verde, Mali. A well-developed logistics network and a partnership network cheer us to dispatch our goods anywhere in the world as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To ask a question or book, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Guide bushing | Steel |