We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264830
Description
| Housing | Die-cast aluminum,Steel |
| Sealing material | Hydrogenated acrylonitrile butadiene rubber |
| CE declaration of conformity | |
| Protection class | IP65 |
| Number of wires | 5-pin |
| Port size | M12 |
| Type | Plug |
| Nominal flow Qn | 1300 l/min |
| Hysteresis | < 0.03 bar |
| DC operating voltage | 24 V |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 5610264830, communicate with FAMAGA, the world's leading vendor of industrialized equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of items and individual attention to each client. We appreciate everyone, who liased with us - thus, our regular consumers bring in the most attractive purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such purchasers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Morocco, Bosnia and Herzegovina, Singapore, Finland, Nicaragua, Mozambique, Croatia, Togo, Australia, Malaysia, Cyprus, Thailand, Senegal, Vietnam, Netherlands, Kiribati, Switzerland, Dominica, Japan, Brunei, Peru, Laos, Fiji, Yemen, Argentina, Angola, Philippines, Seychelles, South Korea, Swaziland, Tajikistan, Burkina Faso, Central African Republic, Mauritania, Suriname, Benin, Serbia, Moldova. A well-developed logistics link and a partnership network allow us to dispatch our items anywhere in the planet with no delay without undermining product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the direction of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as stay in control.
To ask a question or make a request, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Version | Poppet valve |
| Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
| Certificates | CE declaration of conformity |
| Working pressure max | See table |
| Ambient temperature min./max. | 5 ... 50 °C |
| Medium temperature min./max. | 5 ... 50 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 1 mg/m³ |
| Nominal flow Qn | 1300 l/min |
| Control | Analog |
| DC operating voltage | 24 V |
| Voltage tolerance DC | -20% / +30% |
| Permissible ripple | 5% |
| Max. power consumption | 1400 mA |
| Protection class | IP65 |
| Weight | 2,05 kg |
| Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
| Material |
|---|
| Housing | Die-cast aluminum Steel |
| Seals | Hydrogenated acrylonitrile butadiene rubber |
