We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264810
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.03 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5610264810, call FAMAGA, the world's influential company of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outcomes and particular attention to each purchaser. We understand everyone, who collaborated with us - thus, our regular purchasers get the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 3500 such clients, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Suriname, Venezuela, Bahrain, Romania, Samoa, Seychelles, Malaysia, Djibouti, New Zealand, Papua New Guinea, Qatar, Panama, Iran, Honduras, Turkey, Switzerland, India, Bolivia, Syria, Monaco, Yemen, Saudi Arabia, Albania, Zambia, Japan, Swaziland, Moldova, The Gambia, Croatia, Comoros, Poland, Fiji, Kuwait, South Sudan, South Korea, Uganda, Belarus, Sweden, United States, Peru, Brazil. A well-elaborated logistics chains and a partnership network let us to ship our goods anywhere in the planet with no delay without compromising product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only experts, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as stay in control.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |