We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264530
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.03 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5610264530, communicate with FAMAGA, the world's main producer of streamlined equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of items and special attention to each purchaser. We appreciate everyone, who conspired with us - thus, our regular clients accept the most attractive purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Sweden, Bahrain, San Marino, Eritrea, Pakistan, Comoros, Qatar, China, Uruguay, Slovenia, Cyprus, United Arab Emirates, Australia, Canada, Thailand, Bolivia, Armenia, Togo, East Timor, The Bahamas, Swaziland, Chad, Finland, Lithuania, Monaco, Kuwait, Brazil, Georgia, Malaysia, Mexico, Mozambique, South Sudan, Nepal, Russia, Poland, Bangladesh, Burkina Faso, Dominica, Ireland, Albania, Niger. A well-built logistics series and a partnership network guide us to conduct our units anywhere in the planet immediately without damaging product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is rising every day. We are happy that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as stay in control.
To request or make a request, phone us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |