We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264510
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.03 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5610264510, call FAMAGA, the world's principle retailer of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of outcomes and personalseparate attention to each orderer. We understand everyone, who cooperated with us - thus, our regular customers receive the most beneficial purchase forms and discounts on the factory-made equipment market. At this time, there are more than 3500 such buyers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Dominica, San Marino, Guinea-Bissau, Netherlands, Botswana, Mexico, Cyprus, Cape Verde, Central African Republic, Colombia, Panama, Vietnam, New Zealand, Oman, Iran, Togo, Nigeria, Djibouti, Mauritius, Guyana, Kuwait, Liberia, Samoa, Greece, The Bahamas, Nepal, Niger, Jamaica, Qatar, Afghanistan, Seychelles, Russia, Morocco, El Salvador, Mozambique, Sudan, South Korea, Syria, Guatemala, Finland, Slovakia. A well-shaped logistics system and a partnership network allow us to deliver our items anywhere in the planet immediately without undermining product quality.
A particular source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is growing every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as stay in control.
To inquire or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |