We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264500
Description
| Housing | Die-cast aluminum,Steel |
| Sealing material | Hydrogenated acrylonitrile butadiene rubber |
| CE declaration of conformity | |
| Protection class | IP65 |
| Number of wires | 5-pin |
| Port size | M12 |
| Type | Plug |
| Nominal flow Qn | 1300 l/min |
| Hysteresis | < 0.03 bar |
| DC operating voltage | 24 V |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Aventics (brand of Emerson) 5610264500, reach FAMAGA, the world's influential retailer of manufacturing equipment. Our company has existed for more than ten years - these are cycles of experience, which are portrayed in the quality of outputs and special attention to each customer. We appreciate everyone, who cooperated with us - therefore, our regular consumers accept the most flexible purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Uganda, South Africa, Cambodia, Chad, Namibia, Austria, Denmark, Armenia, Dominica, Lebanon, Eswatini, Norway, Suriname, Bhutan, Nepal, Macedonia, Luxembourg, Kiribati, Equatorial Guinea, Turkmenistan, Iran, Monaco, Greece, Pakistan, Uzbekistan, Australia, Egypt, Cameroon, Andorra, Kazakhstan, Libya, Belize, New Zealand, Burundi, Czech Republic, Mauritius, Rwanda, Bangladesh, Niger, Lithuania, Mauritania. A well-shaped logistics series and a partnership network help us to send our units anywhere in the world quickly without damaging product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this number is ascending every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Version | Poppet valve |
| Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
| Certificates | CE declaration of conformity |
| Working pressure max | See table |
| Ambient temperature min./max. | 5 ... 50 °C |
| Medium temperature min./max. | 5 ... 50 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 1 mg/m³ |
| Nominal flow Qn | 1300 l/min |
| Control | Analog |
| DC operating voltage | 24 V |
| Voltage tolerance DC | -20% / +30% |
| Permissible ripple | 5% |
| Max. power consumption | 1400 mA |
| Protection class | IP65 |
| Weight | 2,05 kg |
| Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
| Material |
|---|
| Housing | Die-cast aluminum Steel |
| Seals | Hydrogenated acrylonitrile butadiene rubber |
