We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396903
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822396903, catch up with FAMAGA, the world's dominant company of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each consumer. We appreciate everyone, who worked with us - so, our regular clients obtain the most flexible purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Iraq, France, Myanmar, Liechtenstein, Slovakia, Senegal, Ukraine, Zambia, Haiti, Malawi, Macedonia, India, Mauritius, Liberia, Syria, Iceland, Samoa, Mongolia, Romania, Burundi, Uganda, South Sudan, Brazil, Guatemala, Bangladesh, Poland, Denmark, Kenya, Turkey, Montenegro, Cameroon, Sudan, Malta, Ghana, Belize, Austria, Sierra Leone, Rwanda, Moldova, Mozambique. A well-shaped logistics bond and a partnership network assist us to conduct our units anywhere in the globe quickly without discrediting product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |