We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001020
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001020, make contact with FAMAGA, the world's top producer of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of goods and individual attention to each consumer. We praise everyone, who conspired with us - thus, our regular buyers obtain the most beneficial purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Venezuela, Colombia, San Marino, Honduras, El Salvador, Guinea-Bissau, South Korea, Nepal, Cape Verde, Botswana, Papua New Guinea, Monaco, Estonia, Serbia, Sierra Leone, Nicaragua, Algeria, Finland, Argentina, Samoa, Liberia, Jamaica, Costa Rica, Jordan, Belarus, Hungary, Haiti, Paraguay, Switzerland, China, Morocco, Swaziland, Qatar, Zimbabwe, Cyprus, Yemen, Indonesia, Georgia, Comoros, Mauritania, Austria. A well-developed logistics chains and a partnership network allow us to conduct our goods anywhere in the globe promptly without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or book, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |