We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
8985041422
Description
| Standardization | ISO 5599-1 |
| Accessory type | type F |
| Number of valve positions | 1 |
| Frame size | ISO 4 |
| Sealing material | Acrylonitrile butadiene rubber |
| Subbase | Die-cast aluminum |
| Compressed air connection output | G 3/4 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 8985041422, contact FAMAGA, the world's the best vendor of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of products and individual attention to each buyer. We appreciate everyone, who joined with us - hence, our regular customers accept the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such customers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Portugal, Malawi, France, Saudi Arabia, Malta, Myanmar, Austria, Bahamas, Bangladesh, Zambia, Slovakia, Ecuador, Lebanon, Lithuania, Mali, Grenada, Jordan, Bhutan, Moldova, Belarus, Brazil, South Sudan, Denmark, Netherlands, Malaysia, Libya, Comoros, Nicaragua, Brunei, Armenia, Laos, Sudan, Central African Republic, Kenya, Angola, Ukraine, Uruguay, Australia, Andorra, Bulgaria, Czech Republic, Yemen. A advanced logistics chains and a partnership network let us to deliver our products anywhere in the globe immediately without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or book, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 5599-1 |
| Compressed air connection | according to ISO 5599-1 |
| Working pressure min./max. | -0,95 ... 10 bar |
| Ambient temperature min./max. | -25 ... 70 °C |
| Medium temperature min./max. | -25 ... 70 °C |
| Medium | Compressed air |
| Number of valve positions max. | 1 |
| Grid dimension | 82 mm |
| Direction of pneumatic port (1) | On the side |
| Direction of pneumatic port (3,5) | On the side |
| Direction of pneumatic port (2,4) | Down |
| Direction of pneumatic port (12) | On the side |
| Direction of pneumatic port (14) | On the side |
| Exhaust (3,5) | With directional exhaust (3/5) |
| Exhaust type | Ports separated |
| Weight | 1,37 kg |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Base plate | Die-cast aluminum |
| Seal | Acrylonitrile butadiene rubber |
