We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651428
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 250 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480651428, contact FAMAGA, the world's leading producer of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of merchandises and particular attention to each orderer. We appreciate everyone, who cooperated with us - therefore, our regular consumers procure the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Eritrea, Australia, The Gambia, Estonia, Mozambique, Egypt, Canada, Jordan, The Bahamas, Japan, Liechtenstein, Pakistan, Dominica, Serbia, Burkina Faso, Saudi Arabia, South Sudan, Nicaragua, Czech Republic, Morocco, Chile, Costa Rica, Bolivia, Djibouti, Gambia, Poland, Senegal, Peru, Guatemala, Philippines, Eswatini, Montenegro, Croatia, Iraq, Panama, Iran, Kuwait, Andorra, Suriname, Central African Republic, Switzerland, New Zealand, Brunei, East Timor. A advanced logistics bond and a partnership network let us to conduct our units anywhere in the globe on-time without disreputing product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |