We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001400
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001400, contact FAMAGA, the world's top producer of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We praise everyone, who conspired with us - thus, our regular consumers accept the most beneficial purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Monaco, Central African Republic, Philippines, Peru, Mexico, Burkina Faso, Romania, Cameroon, Fiji, Guyana, Belize, United States, Mauritius, Finland, Mozambique, Gambia, Angola, Russia, Austria, Dominica, Rwanda, Tajikistan, China, Estonia, Liechtenstein, Comoros, Iran, Samoa, Belarus, Qatar, Kenya, Turkey, Cyprus, South Sudan, Switzerland, Uruguay, Suriname, Tanzania, Syria, Sudan, Djibouti, Uganda, Kuwait, Haiti. A well-elaborated logistics chains and a partnership network guide us to deliver our units anywhere in the globe on-time without discrediting product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |