We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007026
Description
Parts | Pre-filter |
Condensate drain | fully automatic, closed without pressure |
filter porosity | 0.3 µm |
inspection glass | with window |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 900 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412007026, connect FAMAGA, the world's key supplier of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each consumer. We esteem everyone, who worked with us - hence, our regular clients obtain the most desirable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Liechtenstein, Mauritius, Andorra, Greece, Montenegro, Dominican Republic, Lesotho, Czech Republic, Qatar, Burundi, Ecuador, Belgium, Slovakia, Sierra Leone, Guinea, Namibia, Austria, Grenada, Fiji, Cameroon, Antigua and Barbuda, Indonesia, Equatorial Guinea, Comoros, Iceland, Laos, Liberia, El Salvador, Ghana, Sweden, Argentina, Kyrgyzstan, Tanzania, China, Morocco, Norway, Jordan, Kiribati, East Timor, Bangladesh, Togo, Algeria, Zimbabwe, Nigeria, Costa Rica, Uruguay, Georgia. A well-built logistics bond and a partnership network cheer us to conduct our goods anywhere in the globe on-time without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of industrial equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Pre-filter, Can be assembled into blocks |
Parts | Pre-filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
filter porosity | 0,3 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Recommended pre-filtering | 5 µm |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 2 : - : 3 |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Impregnated paper |