We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Aventics (brand of Emerson) R480176490, reach FAMAGA, the world's prime company of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each consumer. We praise everyone, who engaged with us - so, our regular purchasers get the most desirable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, South Africa, Macedonia, Slovakia, New Zealand, Canada, Lebanon, Bulgaria, Togo, Tonga, Saudi Arabia, Libya, Grenada, Hungary, Thailand, Turkmenistan, Jamaica, Tanzania, Denmark, Suriname, Chad, Yemen, Gambia, Namibia, Moldova, Malaysia, Australia, Zimbabwe, Israel, Montenegro, Armenia, Finland, Costa Rica, Nigeria, Andorra, Zambia, Belize, Peru, Tunisia, Malta, Mali, Cameroon, Iraq, Panama. A well-developed logistics bond and a partnership network guide us to ship our products anywhere in the earth promptly without discrediting product quality.
A particular source of pride for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |