We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822241405
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822241405, communicate with FAMAGA, the world's key company of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We admire everyone, who worked with us - therefore, our regular customers receive the most flexible purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such customers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Chad, Niger, Thailand, Myanmar, The Gambia, Bosnia and Herzegovina, Guatemala, Zambia, Monaco, North Korea, Bangladesh, Cameroon, Australia, Bhutan, Tanzania, Luxembourg, Burundi, Namibia, Greece, Uzbekistan, Saudi Arabia, Ghana, Bulgaria, Albania, Azerbaijan, Tonga, New Zealand, Sierra Leone, Hungary, Comoros, Denmark, Andorra, Israel, Lithuania, Libya, Mozambique, Nigeria, Mongolia, Kazakhstan, Iceland, Macedonia, Pakistan. A advanced logistics bond and a partnership network let us to deliver our units anywhere in the globe immediately without disreputing product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |