We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412014260
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412014260, make contact with FAMAGA, the world's key distributor of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each orderer. We respect everyone, who conspired with us - so, our regular clients get the most convenient purchase conditions and discounts on the industrial equipment market. Today, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, South Sudan, Mozambique, Syria, Singapore, Andorra, Belgium, Kyrgyzstan, Ireland, Switzerland, Papua New Guinea, United Arab Emirates, Mauritius, The Bahamas, Cape Verde, Mali, Malaysia, Belarus, Egypt, Angola, Fiji, Nepal, Suriname, Moldova, Jamaica, Bolivia, Costa Rica, Belize, Mexico, Senegal, Djibouti, Togo, Afghanistan, Guatemala, Brunei, Montenegro, Pakistan, Benin, Kuwait, Botswana, Peru, Slovakia. A well-developed logistics network and a partnership network allow us to send our goods anywhere in the globe immediately without discrediting product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or place an order, phone us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |