We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471325225
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 25 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 150 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7471325225, call FAMAGA, the world's prime distributor of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are outlined in the quality of outputs and individual attention to each consumer. We value everyone, who conspired with us - thus, our regular customers accept the most helpful purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4500 such customers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Angola, Mexico, Costa Rica, Netherlands, Tanzania, Guinea, Paraguay, Mauritania, Djibouti, Honduras, Bolivia, Zimbabwe, Fiji, Serbia, Moldova, Panama, Poland, Burkina Faso, Jamaica, El Salvador, Sweden, Syria, Slovakia, Malaysia, China, Tajikistan, Antigua and Barbuda, Madagascar, Iran, Estonia, Cape Verde, Indonesia, Belarus, Kuwait, Turkey, United States, Guatemala, Suriname, Ireland, Samoa, Israel. A well-elaborated logistics bond and a partnership network let us to dispatch our elements anywhere in the globe as soon as possible without compromising product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are glad that users choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as stay in control.
To request or order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |