We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013655
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412013655, communicate with FAMAGA, the world's principle supplier of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are portrayed in the quality of goods and special attention to each consumer. We cherish everyone, who engaged with us - therefore, our regular consumers obtain the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such clients, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Bahrain, Namibia, Congo, Azerbaijan, Mozambique, Switzerland, Belgium, Iraq, France, Kazakhstan, Russia, Paraguay, Cyprus, Zambia, Turkey, East Timor, Rwanda, Romania, Bosnia and Herzegovina, Brazil, Mali, Andorra, United Arab Emirates, Haiti, Chile, Ghana, Nigeria, United States, Tunisia, Denmark, Bulgaria, Montenegro, North Korea, Sierra Leone, Tanzania, Bangladesh, Equatorial Guinea, India, Sudan, New Zealand, Antigua and Barbuda. A well-developed logistics link and a partnership network let us to dispatch our goods anywhere in the earth as soon as possible without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To ask a question or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |