We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340504
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822340504, make contact with FAMAGA, the world's dominant provider of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are illustrated in the quality of goods and special attention to each buyer. We esteem everyone, who engaged with us - therefore, our regular clients get the most helpful purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Cambodia, Algeria, Guatemala, Belgium, Antigua and Barbuda, France, Montenegro, Iceland, Japan, Burma, Eswatini, Tanzania, Netherlands, Iraq, Czech Republic, Bhutan, Fiji, North Korea, Kuwait, Malawi, Brunei, Belize, Uzbekistan, Moldova, Slovakia, Tunisia, Vietnam, Sudan, Ecuador, Ghana, Central African Republic, Argentina, Malta, Chile, Libya, Kiribati, India, Mexico, Mali, Thailand, Namibia, Zambia, Burkina Faso. A well-shaped logistics link and a partnership network let us to send our units anywhere in the planet as soon as possible without damaging product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that users choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or book, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |