We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822241403
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822241403, call FAMAGA, the world's leading distributor of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each client. We cherish everyone, who cooperated with us - therefore, our regular consumers bring in the most desirable purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Barbados, Burma, Portugal, Comoros, Liberia, Tanzania, Malawi, Central African Republic, Moldova, Lebanon, Angola, Uzbekistan, Myanmar, Nigeria, Iceland, Belgium, El Salvador, Saudi Arabia, Turkey, Croatia, Bhutan, Macedonia, Costa Rica, Ecuador, Syria, Andorra, Tunisia, Czech Republic, Austria, Norway, Serbia, Liechtenstein, Tonga, Uruguay, Guyana, Kyrgyzstan, Ukraine, Kazakhstan, Thailand, Greece, Mali, Nepal, Israel, Equatorial Guinea, Rwanda, Slovakia, Madagascar. A well-elaborated logistics system and a partnership network allow us to dispatch our goods anywhere in the globe with no delay without undermining product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or order, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |