We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301801
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
Housing | Die-cast aluminum |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 18000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821301801, call FAMAGA, the world's leading supplier of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of items and individual attention to each client. We admire everyone, who cooperated with us - thus, our regular clients receive the most favorable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Seychelles, Egypt, Brunei, Portugal, Italy, Latvia, El Salvador, Ecuador, Uganda, Armenia, Swaziland, Burkina Faso, Liberia, Croatia, Poland, Central African Republic, Madagascar, Andorra, Norway, Iraq, Uzbekistan, The Bahamas, Suriname, South Korea, Eritrea, Mauritius, Serbia, Lithuania, Nicaragua, Philippines, Tajikistan, Thailand, The Gambia, Antigua and Barbuda, Guatemala, Mongolia, Macedonia, China, Mexico, Finland, Namibia, Nepal, Moldova, Pakistan, Mozambique. A well-shaped logistics system and a partnership network help us to conduct our products anywhere in the earth with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 450 cm³ |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |