We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412010785
Description
Parts | Pre-filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 0.3 µm |
Housing | Die cast zinc |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 380 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412010785, reach FAMAGA, the world's major distributor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each consumer. We praise everyone, who conspired with us - hence, our regular buyers bring in the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such buyers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Libya, Slovakia, Senegal, Dominican Republic, Portugal, Ghana, Burundi, Russia, Syria, Estonia, Thailand, Israel, Monaco, North Korea, Kyrgyzstan, Dominica, Montenegro, Cyprus, Switzerland, Zimbabwe, Guyana, Uzbekistan, Uruguay, Rwanda, Saudi Arabia, Equatorial Guinea, Mongolia, Samoa, Liechtenstein, Malta, Bosnia and Herzegovina, Kuwait, Antigua and Barbuda, Georgia, Niger, Peru, Djibouti, India, Austria, Lithuania, Benin, Australia, Ireland, Mali, Czech Republic. A well-built logistics bond and a partnership network allow us to send our goods anywhere in the world immediately without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Pre-filter, Can be assembled into blocks |
Parts | Pre-filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 2 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 10 cm³ |
Filter element | exchangeable |
filter porosity | 0,3 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". | |
Recommended pre-filtering | 5 µm |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 2 : - : 3 |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Filter insert | Impregnated paper |