We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300383
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6900 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821300383, call FAMAGA, the world's prime company of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of items and individual attention to each orderer. We value everyone, who conspired with us - therefore, our regular clients pick up the most desirable purchase forms and discounts on the factory-made equipment market. At present, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Austria, Hungary, Thailand, Bahamas, France, Bulgaria, Antigua and Barbuda, Angola, Mauritius, Serbia, Australia, Kyrgyzstan, Andorra, Libya, East Timor, Senegal, United Arab Emirates, Togo, Guinea, Fiji, Liechtenstein, Uganda, Czech Republic, Liberia, Iraq, Zambia, Botswana, Ecuador, Tonga, Guyana, Morocco, Cameroon, Philippines, Chile, Finland, Cape Verde, Nigeria, Ghana, Mali, Ireland, Uruguay, Egypt, Argentina, Paraguay. A well-shaped logistics series and a partnership network cheer us to conduct our goods anywhere in the planet quickly without damaging product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been provided, and this number is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 6900 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 50 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |