We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480185615
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480185615, catch up with FAMAGA, the world's principle distributor of machine made equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of merchandises and individual attention to each orderer. We esteem everyone, who engaged with us - thus, our regular consumers pick up the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Syria, Swaziland, Bahrain, Uzbekistan, The Bahamas, Haiti, Djibouti, Ukraine, Oman, Bahamas, Hungary, Papua New Guinea, Singapore, Morocco, Peru, Sweden, Netherlands, Zimbabwe, Lithuania, Argentina, Eritrea, El Salvador, Eswatini, Panama, Guyana, Suriname, Croatia, Jordan, Poland, Paraguay, Vietnam, Serbia, Andorra, Fiji, Cape Verde, Armenia, Yemen, Kyrgyzstan, Niger, Mauritania, Mauritius, Comoros, Ghana, Philippines, Bulgaria, Afghanistan, Dominica. A well-developed logistics bond and a partnership network guide us to deliver our products anywhere in the planet promptly without disreputing product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized Die-cast aluminum, anodized |
End cover | Aluminum, anodized Die-cast aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |