We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480148986
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480148986, get in touch with FAMAGA, the world's key vendor of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We respect everyone, who worked with us - so, our regular buyers bring in the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, East Timor, Kuwait, San Marino, Turkmenistan, Guyana, Zimbabwe, China, Macedonia, Singapore, Papua New Guinea, Israel, Slovenia, Romania, Suriname, Albania, Dominica, Japan, Tajikistan, Greece, Moldova, Netherlands, Angola, Tanzania, United Arab Emirates, Nicaragua, Sweden, Malaysia, Antigua and Barbuda, Mozambique, Austria, Switzerland, Peru, Denmark, South Sudan, Estonia, Nigeria, Swaziland, Czech Republic, Slovakia, Belarus, Costa Rica, Mexico, Montenegro, Croatia, Senegal, Latvia, Syria. A well-elaborated logistics link and a partnership network allow us to send our items anywhere in the world with no delay without discrediting product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |