We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822395601
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Standardization | NFE 49004 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822395601, catch up with FAMAGA, the world's prime vendor of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each user. We value everyone, who cooperated with us - hence, our regular buyers receive the most convenient purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Dominican Republic, Monaco, Oman, Iran, Belgium, Colombia, Iceland, Togo, China, Zambia, Croatia, Swaziland, Moldova, Serbia, Guinea, Liberia, Sweden, Morocco, Yemen, Vietnam, Kiribati, Haiti, Russia, Indonesia, Mauritius, Burkina Faso, Senegal, Albania, Guatemala, Georgia, Cameroon, Belarus, Greece, Latvia, Mongolia, Finland, Kuwait, Mauritania, Kyrgyzstan, Tajikistan, Austria, Seychelles, Suriname. A advanced logistics system and a partnership network assist us to send our units anywhere in the world with no delay without compromising product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or order, contact us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |