We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651421
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480651421, catch up with FAMAGA, the world's leading producer of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of products and private attention to each orderer. We esteem everyone, who cooperated with us - therefore, our regular buyers procure the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Kuwait, Latvia, Liberia, Libya, Comoros, Armenia, Monaco, Singapore, Netherlands, South Sudan, Bahamas, Lithuania, Romania, Malaysia, Russia, United Arab Emirates, Philippines, Hungary, North Korea, Peru, Tonga, Niger, Fiji, The Gambia, Indonesia, Syria, Montenegro, Albania, Vietnam, Iceland, Haiti, Sierra Leone, Samoa, Bolivia, China, Kazakhstan, Botswana, Egypt, East Timor, Poland, Burkina Faso, Thailand. A well-shaped logistics bond and a partnership network allow us to ship our goods anywhere in the globe promptly without discrediting product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |