Aventics (brand of Emerson) R480651385
  Aventics (brand of Emerson) R480651385

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480651385 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480651385

Description

Functional principle double-acting
Cushioning pneumatically
non-adjustable
Magnetic piston with magnetic piston
Piston diameter 20 mm
Piston rod thread M8
Standardization ISO 6432
Stroke 320 mm
Sealing material Nitrile butadiene rubber
Scraper Thermoplastic polyurethane (TPU)
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480651385

If you are seeking Aventics (brand of Emerson) R480651385, reach FAMAGA, the world's key distributor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of spare parts and individual attention to each consumer. We admire everyone, who worked with us - so, our regular purchasers pick up the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the world . A well-developed logistics link and a partnership network guide us to deliver our products anywhere in the globe immediately without damaging product quality.

A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.

All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.

To request or book, contact us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features R480651385

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel, ground
Piston rod Stainless steel, ground
Piston Aluminum
Front cover Stainless steel, Electropolished
End cover Stainless steel, Electropolished
Seal Nitrile butadiene rubber
Nut for cylinder mounting Stainless steel, ground
Nut for piston rod Stainless steel, ground
Scraper Thermoplastic polyurethane (TPU)
Guide bushing Steel