We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822241400
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822241400, connect FAMAGA, the world's top distributor of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of merchandises and special attention to each user. We respect everyone, who worked with us - thus, our regular purchasers accept the most attractive purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Cameroon, Côte d\'Ivoire, Kyrgyzstan, India, Guinea-Bissau, Dominican Republic, Mauritania, South Korea, Latvia, Pakistan, Honduras, Eritrea, Suriname, Madagascar, Botswana, China, East Timor, Chad, Nepal, Croatia, New Zealand, The Bahamas, Uruguay, Afghanistan, Yemen, Brazil, Qatar, Serbia, El Salvador, Norway, Mauritius, Mozambique, Philippines, Azerbaijan, Djibouti, Haiti, Russia, Samoa, Panama, Macedonia, Comoros, Mongolia, Luxembourg, Belarus. A well-built logistics chains and a partnership network let us to send our units anywhere in the globe as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To request or place an order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |