We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480060027
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480060027, communicate with FAMAGA, the world's foremost vendor of industrialized equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each purchaser. We appreciate everyone, who collaborated with us - thus, our regular purchasers accept the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 3500 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Lithuania, Equatorial Guinea, Kyrgyzstan, Nicaragua, Russia, Sweden, East Timor, Myanmar, Brunei, Philippines, Gambia, Canada, Yemen, Poland, Tanzania, Guyana, Pakistan, South Sudan, Bolivia, El Salvador, Netherlands, Liechtenstein, Australia, Benin, Mexico, Luxembourg, Slovakia, Panama, Costa Rica, Samoa, India, South Korea, Macedonia, Estonia, Indonesia, Ireland, Israel, Zimbabwe, Austria, Comoros, Dominica. A well-built logistics link and a partnership network assist us to dispatch our units anywhere in the world as soon as possible without disreputing product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To request or make a request, contact us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Ø25 not according to ISO 15552 The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. Ø25 not according to ISO 15552 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |