We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480176441
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 101.6 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480176441, call FAMAGA, the world's the best provider of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and personalseparate attention to each customer. We value everyone, who collaborated with us - therefore, our regular clients accept the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Uruguay, Guinea-Bissau, Russia, Dominican Republic, Finland, Colombia, Antigua and Barbuda, Denmark, Monaco, Mauritania, Georgia, Mongolia, Bolivia, Grenada, Libya, Albania, Dominica, Pakistan, Afghanistan, Benin, Estonia, Lithuania, South Sudan, East Timor, Burundi, Swaziland, Sierra Leone, Mozambique, Luxembourg, Sweden, Bulgaria, El Salvador, Ghana, Yemen, Eswatini, Costa Rica, The Gambia, Botswana, Cyprus, Qatar, Laos. A well-elaborated logistics chains and a partnership network allow us to send our goods anywhere in the world promptly without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |