Aventics (brand of Emerson) R480176941
  Aventics (brand of Emerson) R480176941

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480176941 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480176941

Description

Functional principle double-acting
Cushioning pneumatically,pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 40 mm
Piston rod thread 1/2-20 UNF
Stroke 304.8 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection 1/4 NPT
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480176941

If you are questing Aventics (brand of Emerson) R480176941, call FAMAGA, the world's major vendor of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and special attention to each consumer. We value everyone, who liased with us - so, our regular customers get the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the planet . A well-built logistics link and a partnership network allow us to dispatch our goods anywhere in the world with no delay without compromising product quality.

A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of industrial equipment.

All spare parts from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as keep on top of it.

To consult or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R480176941

Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.