We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412010650
Description
Parts | Filter pressure regulator |
Air supply | left |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 1000 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412010650, call FAMAGA, the world's key distributor of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each consumer. We esteem everyone, who liased with us - so, our regular buyers bring in the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Bosnia and Herzegovina, Honduras, Qatar, Singapore, Mauritania, Tanzania, Congo, Armenia, Afghanistan, Vietnam, Brazil, Albania, Malawi, Azerbaijan, Thailand, Egypt, Bhutan, Romania, Burkina Faso, Morocco, Poland, Monaco, Saudi Arabia, Benin, Chile, Malaysia, Nicaragua, Denmark, Mauritius, The Gambia, Yemen, United States, Fiji, Uganda, Cyprus, Uruguay, East Timor, Nigeria, Philippines, United Arab Emirates, South Korea, Cape Verde, China, Niger. A well-shaped logistics link and a partnership network cheer us to send our goods anywhere in the world quickly without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as stay in control.
To consult or order, contact us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 1000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 8 bar |
Pressure supply | single |
Filter reservoir volume | 16 cm³ |
Filter element | exchangeable |
Condensate drain | fully automatic, closed without pressure |
Weight | 0,256 kg |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate |
Filter insert | Cellpor |