Aventics (brand of Emerson) R480162983
  Aventics (brand of Emerson) R480162983

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480162983 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480162983

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 40 mm
Piston rod thread M12x1,25
Standardization ISO 15552
Stroke 320 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/4
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480162983

If you are questing Aventics (brand of Emerson) R480162983, catch up with FAMAGA, the world's leading provider of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each client. We esteem everyone, who cooperated with us - hence, our regular buyers bring in the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the earth . A well-built logistics connection and a partnership network allow us to dispatch our products anywhere in the globe with no delay without discrediting product quality.

A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of factory-made equipment.

All items from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.

To consult or book, contact us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features R480162983

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.