We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342600
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822342600, get in touch with FAMAGA, the world's the best vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and individual attention to each purchaser. We cherish everyone, who collaborated with us - thus, our regular customers bring in the most desirable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Barbados, Mauritius, Egypt, Denmark, Chad, Poland, Sierra Leone, Sri Lanka, Austria, Russia, Cape Verde, Bolivia, Estonia, Oman, Equatorial Guinea, Albania, Afghanistan, The Gambia, Morocco, Bhutan, Philippines, New Zealand, Guyana, Uganda, Cyprus, Botswana, Czech Republic, China, Guatemala, United Arab Emirates, Lithuania, Georgia, Switzerland, Sweden, East Timor, Peru, Burkina Faso, Macedonia, Luxembourg, Mauritania, Libya, Jamaica, Turkey, Yemen, Antigua and Barbuda. A advanced logistics system and a partnership network let us to conduct our goods anywhere in the earth on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, contact us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |