We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394909
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822394909, communicate with FAMAGA, the world's dominant distributor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each consumer. We respect everyone, who worked with us - so, our regular purchasers obtain the most desirable purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Bahrain, Algeria, Chile, United Arab Emirates, Monaco, Czech Republic, Cambodia, Portugal, Latvia, Burundi, Nigeria, Macedonia, Iceland, Grenada, Haiti, Lithuania, Ghana, Tunisia, Uruguay, Romania, North Korea, Sweden, Liechtenstein, East Timor, Eswatini, Argentina, Comoros, Armenia, Slovakia, Norway, Pakistan, Cameroon, Ukraine, Uganda, Equatorial Guinea, Zambia, Rwanda, China, Mongolia, Hungary, Mexico, Malta, Kuwait, Thailand, Jamaica. A well-developed logistics bond and a partnership network cheer us to ship our items anywhere in the globe immediately without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are glad that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |