We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2631380060
Description
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
Subbase | Polyamide fiber-glass reinforced |
Compressed air connection input | 1/2-14 NPTF |
Type | inch |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 2631380060, contact FAMAGA, the world's key distributor of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of products and personalseparate attention to each user. We admire everyone, who conspired with us - therefore, our regular clients receive the most flexible purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4000 such clients, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Macedonia, Sudan, Philippines, Turkey, Belgium, France, Bhutan, Liechtenstein, Myanmar, Albania, Guatemala, Azerbaijan, India, Mauritius, Saudi Arabia, Niger, Moldova, Tajikistan, Malawi, Poland, Afghanistan, Belize, Ecuador, Kyrgyzstan, Montenegro, Nigeria, Egypt, Tanzania, Tonga, Peru, Jordan, Norway, Central African Republic, Equatorial Guinea, Lithuania, Estonia, Libya, Serbia, Mali, Uganda, Austria, Kuwait, Ukraine, Haiti, Iraq, Djibouti. A well-shaped logistics connection and a partnership network allow us to deliver our elements anywhere in the earth quickly without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the field of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To inquire or place an order, contact us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Medium | Compressed air |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
End plate kit: external pilot |
Material |
---|
Base plate | Polyamide fiber-glass reinforced |
Seal | Hydrogenated acrylonitrile butadiene rubber |
Screws | Stainless steel |