We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176427, call FAMAGA, the world's prime company of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and personalseparate attention to each purchaser. We value everyone, who conspired with us - thus, our regular clients obtain the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such customers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Austria, Monaco, Sri Lanka, Guatemala, Denmark, North Korea, France, Laos, Kuwait, Burma, Mauritius, Zambia, Ghana, Kiribati, Equatorial Guinea, Guyana, Bangladesh, Norway, Macedonia, Malawi, Tonga, Turkmenistan, Liberia, El Salvador, Bulgaria, Costa Rica, Kyrgyzstan, Chile, Swaziland, Namibia, Czech Republic, Australia, Indonesia, Jordan, Yemen, Uruguay, Cape Verde, Malta, Kenya, Paraguay, Lithuania, Greece, Afghanistan. A well-elaborated logistics network and a partnership network allow us to send our goods anywhere in the world promptly without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |