We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402001002
Description
Guide | ball rail guide |
Functional principle | double-acting |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 900 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R402001002, contact FAMAGA, the world's main distributor of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of products and private attention to each orderer. We appreciate everyone, who joined with us - therefore, our regular buyers accept the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Thailand, Cambodia, El Salvador, Colombia, Mozambique, Kiribati, Kenya, Moldova, East Timor, Liberia, Lebanon, Brazil, Australia, Zambia, Grenada, The Gambia, Bhutan, Nigeria, Laos, Liechtenstein, Ukraine, Antigua and Barbuda, Belize, Malaysia, Uruguay, Turkmenistan, Montenegro, Paraguay, Syria, Hungary, Bulgaria, Equatorial Guinea, Suriname, Andorra, Dominica, Iraq, Samoa, Norway, Iceland, Turkey, Niger, Slovakia, Kuwait. A well-built logistics network and a partnership network let us to ship our units anywhere in the earth promptly without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, contact us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Cap | Aluminum, anodized |
Seal | Polyurethane |
Sealing strips | Polyurethane Stainless steel |
Ball rail table | Aluminum, anodized |
Guide shuttle | Stainless steel Steel |
Guide rail | Stainless steel, hardened Steel, hardened |